FOUR-SIX LEVEL LIFT/SLIDING PARKING SYSTEM
Operating principle
Equipment for the arrangement of columns of six layers, each device partition one layer to five layers each with a sliding seat. Equipment through six layers of vehicle lifting movement, a layer of vehicle shifting action, the two layer to the five layer of vehicle loading plate lifting, shifting action to achieve access to the car. A layer of parking spaces can directly access the car; two to six layers of a parking space needed to access the car, each layer corresponds to the vehicle loading plate underneath the vehicle traversing a parking position, will need to access the car seat for vehicle loading plate below, so that the vehicle can fail down to the ground, so as to realize the access the car.
Features
- Save land area and take full use of space and columns can be arranged according to your requirements.
- About awning design, can be designed according to your requirements, such as full awning type, part awning type and simple awning type and no awning type.
- Low equipment cost and maintenance cost.
- Lift smooth and low noise, convenient for car go in or out.
- Comprehensive security protection system, such as safety anti-falling hook, mechanism detect people or car entering, car parking limit mechanism, interlock mechanism, emergency brake mechanism.
- Adopt PLC automatic control system, use button, IC card and remote control system, make operation very easy.
Applicable occasion
Ground and underground parking lots in residential area; commercial center and office building; station and hospital.
Technical requirements
1. The ground must be reinforced concrete, in order to facilitate the column and the expansion bolt
2. Ground must be neat, ensure the height difference is ±5mm;
3. Equipment needs height ≥3600mm (the size of net space height after deducting the fire tube, a ventilating pine all equipment);
4. The equipment should be installed in the outdoor, canopy.
Specifications:
|
Suitable parking cars
|
Model
|
Mid-size car
|
Large car
|
Over size car
|
|
|
car size
|
Length x width x height
|
Length x width x height
|
Length x width x height
|
|
|
(mm)
|
≤4700x1800x1450
|
≤5000x1850x1550
|
≤5300x1900x1550
|
|
|
|
e.g.: Passat
|
e.g.: Audi A6
|
e.g.: BMW 7 series
|
|
|
Weight
|
≤1500kg
|
≤1700kg
|
≤2350kg
|
|
Requirement spark
|
p
|
4-6
|
4-6
|
4-6
|
|
|
a(mm)
|
5600
|
5900
|
6200
|
|
|
b(mm)
|
2950
|
3250
|
3550
|
|
|
c(mm)
|
1130
|
1130
|
1130
|
|
|
N(mm)
|
2450
|
2450
|
2550
|
|
|
h(mm)
|
1700
|
1700
|
1700
|
|
|
H(mm)
|
h*p+3600
|
h*p+3600
|
h*p+3600
|
|
Motor power
|
lift motor
|
2.2,3.7kw
|
2.2,3.7kw
|
2.2,3.7kw
|
|
|
sliding motor
|
0.2kw
|
0.2kw
|
0.2kw
|
|
Rated speed
|
lift speed
|
4.8,7.0m/min
|
4.8,7.0m/min
|
4.8,7.0m/min
|
|
|
sliding speed
|
6.4,9.5m/min
|
6.4,9.5m/min
|
6.4,9.5m/min
|
|
Power
|
|
motor, chain
|
motor, chain
|
motor, chain
|
|
Power
|
|
3phase 5 wire 380v 50hz
|
3phase 5 wire 380v 51hz
|
3phase 5 wire 380v 52hz
|
|
Control mode
|
|
button, IC card and remote control system
|
|
Surface treatment
|
|
painting galvanized
|
painting galvanized
|
painting galvanized
|
|
Inner width of pallet
|
|
2030
|
2080
|
2130
|
